Weld Bead Processor Brush Type Weld Cleaning Machine Spot Welding Equipment with Intelligent Adjustment, Digital Display Welding Spot Cleaner for Metal Arc La-ser

SpecificationsMaterial: Metal, Plastic and HardwareProcess: PolishingInput Voltage: 110V/220VOutput Voltage: 0-34VPower: 1000WFrequency Adjustment Range: 0-34HzBristle Length: 70mm/2.76 inchesProduct Size: 32*15.2*26cm/12.6*5.98*10.24 inchesPacking ListWeld Cleaner300cm Ground Wire ClampBrushM6 Copper HeadCarbon Fiber ClothSoft ClothInstruction ManualHow to UseInsert the power supply into AC110V, connect the gun to the corresponding terminal, plug in the control line, turn on the power switch, and the power indicator (i.e. red light) will light up.Stick the processing fluid on the processing gun, press the micro switch, and wipe the black weld.After processing, wipe with a damp cloth or water for better resultsPrecautionsPlease wear a mask, goggles and gloves when using this machine to prevent the processing fluid from spraying into the human eyes.Do not switch the machine panel to connect the workpiece and the processing gun line.The gun must be wrapped with processing cloth when using the copper head.The product must be used with a cleaning agent (not included).The stainless steel head can be reused by simply replacing the bristles.

• 【Strong Power】This spot welding cleaner with a power of 1000W, can runs stably so that the output voltage can reach 0-34V. You just need to manipulate it to scrub back and forth on the weld a few times, and the oxidized black spots will be removed immediately.
• 【High Efficiency】The copper head of this weld bead processor is oxidation-resistant, which greatly improves cleaning performance. In addition, the IGBT power tubes greatly increase cleaner occupancy, improving efficiency and longevity. The intelligent short-circuit protection function improves the safety of use.
• 【Save Effort & Low CostYou need to use it to scrub back and forth on the weld several times, and the oxidation black spot will be cleaned immediately. It flexibly removes small gaps and hard-to-touch places, and avoids manual polishing.It takes less time, is faster and has a better cleaning effect than traditional grinding.
• 【Intelligent Adjustment】Equipped with a digital display, it is easy for operators to monitor and manage the data at any time. You can also compensate for unstable voltage with intelligent and frequency adjustment (0-34Hz), which automatically recognizes high and low voltage to clean yellow spots, black spots and solder joints of different degrees.
• 【Wide Application】Perfect for metal, arc, laser, etc. Our weld cleaning machine can be used for metal parts of various materials and shapes, such as automobiles, airplanes, ships and other vehicles, and can also be used to clean yellow spots, black spots, markings, etc. left by materials in industrial processes.